Mitsubishi Electric Q12DCCPU-V - I;O Access Timing; Input (X) Loading Timing; Output (Y) Writing Timing

3
SPECIFICATIONS
3.4 Operation Processing
3.4.2 I/O access timing
3 - 7
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
ACCESS VIA NETWORK MODULES
6
PREPARATORY PROCEDURES AND SETTING
7
I/O NUMBER ASSIGNMENT
8
MEMORIES AND FILES
3.4.2 I/O access timing
This section explains the input (X) and output (Y) data transfer timings of the C Controller
module.
(1) Input (X) loading timing
The C Controller module loads input (X) data at one of the following timings.
• When a bus interface function (such as the QBF_X_In_BitEx function) is
executed in the user program
• When input (X) data are read out from a peripheral device (such as GOT)
(2) Output (Y) writing timing
The C Controller module writes output (Y) data at one of the following timings.
• When a bus interface function (such as the QBF_Y_Out_BitEx function) is
executed in the user program
• When output (Y) data are written from a peripheral device (such as GOT)
Remark
1. For details of the bus interface functions, refer to the following.
C Controller User's Manual (Utility Operation, Programming)
2. For processing time of the bus interface functions, refer to the following.
Appendix 1
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B