APP - 16
APPENDICES
2) Device comment
The device comment data is allocated in the Multiple CPU high speed
transmission area setting for the positioning dedicated signal.
The device can be used while confirming the comment to execute the
control for the Motion CPU area in the PLC CPU area.
a) Diversion of device comment
After opening the diversion source project (Sample data) and the
diversion project, execute the following steps.
1.Operation of the diversion source project (Sample data) (Copy)
Select the "Global Device Comment" in the project view and then
[Project] – [Object] – [Copy] of menu bar.
2.Operation of the diversion project (Paste)
Select the "Global Device Comment" in the project view and then
"[Project] – [Object] – [Paste]" of menu bar.
Copy the "Global
Device Comment"
to the diversion
project from the
diversion source
project.
To Next Page
Loading...
