2 - 49
2 SYSTEM CONFIGURATION
POINTS
(1) The Q63P is dedicated for inputting a voltage of 24VDC.
Do not input a voltage of except 24VDC into it or trouble may occur on the
Q63P.
(2) Ensure that the earth terminals LG and FG are grounded.
(Ground resistance :
100
or loss)
Since the LG terminal has a half of the input voltage, touching this terminal may
result in an electric shock.
(3) When the Q61P, Q62P, Q63P or Q64PN is loaded on the extension base unit,
a system error cannot be detected by the
ERR terminal.
(The
ERR terminal is always OFF.)
To Next Page
Loading...
