1 - 4
1. OVERVIEW OF MIGRATION FROM Q17nDCPU(-S1) TO Q17nDSCPU
(6) Servo system network
Item
Communications medium Optical fiber cable
←
(same as SSCNETIII)
Communications speed 50 Mbps 150 Mbps
Communications
cycle
Send 0.44 ms/0.88 ms 0.22 ms/0.44 ms/0.88 ms
Receive 0.44 ms/0.88 ms 0.22 ms/0.44 ms/0.88 ms
Number of control axes
Up to 16 axes/line
←
(same as SSCNETIII)
Transmission distance
[Standard code for inside panel]
Up to 3 m between stations
Maximum overall distance:
48 m (3 m × 16 axes)
[Standard cable for outside panel]
Up to 20 m between stations
Maximum overall distance:
320 m (20 m × 16 axes)
[Standard code for inside panel and standard cable for
outside panel]
Up to 20 m between stations
Maximum overall distance: 320 m (20 m × 16 axes)
[Long distance cable]
Up to 50 m between stations
Maximum overall distance:
800 m (50 m × 16 axes)
[Long distance cable]
Up to 100 m between stations
Maximum overall distance: 1600 m (100 m × 16 axes)
(7) Engineering environment (required)
Product name Model Version
MELSOFT MT Works2 SW1DND-MTW2-E Ver.1.34L or later
MELSOFT GX Works2 SW1DNC-GXW2-E Ver.1.84N or later
MELSOFT MR Configurator2 SW1DNC-MRC2-E Ver.1.12N or later
To Next Page
Loading...
