Mitsubishi Electric Q173CPUN - 3.3 Layout Design within The Control Panel

3 - 15
3 DESIGN
3.3 Layout Design within The Control Panel
3.3.1 Installation environment
Install the Motion controller system in the following environment conditions.
(1) Ambient temperature is within the range of following conditions.
Q173CPU/Q172CPU
Number of
the Motion CPU
Q173CPUN(-T)/
Q172CPUN(-T)
With Cooling fan unit
(Shipped from the factory)
Without Cooling fan unit
1 0 to 40°C (32 to 104°F)
2 or more
0 to 55°C (32 to 131 °F)
—
(Note-1)
(Note-1) : It is need to install the Cooling fan unit(Q170FAN).
(2) Ambient humidity is within the range of 5 to 95[%] RH.
(3) No condensing from sudden temperature changes
(4) No corrosive or inflammable gas
(5) There must not be a lot of conductible dust, iron filings, oil mist, or salt, organic
solvents.
(6) No direct sunlight
(7) No strong electrical or magnetic fields
(8) No direct vibrations or shocks on the Motion controller