Mitsubishi Electric Q173DSCPU - Torque Limit Value Individual Change Request Instruction from the PLC CPU to the Motion CPU: D(P).CHGT2 (PLC Instruction: D(P).CHGT2 )

3 - 50
3 MOTION DEDICATED PLC INSTRUCTION
3.2.8 Torque limit value individual change request instruction from the PLC CPU to the
Motion CPU: D(P).CHGT2 (PLC instruction: D(P).CHGT2 )
QDS
Setting
data
(Note-3)
Usable devices
Internal devices
(System, User)
File register
Link direct device
J
\G
Unit access device
U \G
Index
register
Z
Constant
Others
Bit Word Bit Word Bit Word Bit Word
Decimal K,
Hexadecimal
H
Real
character
string
(n1)
(S1)
(n2)
(n3)
(D1)
(Note-1)
(Note-2) (Note-2)
(D2)
(Note-1)
(Note-2) (Note-2)
: Usable : Usable partly
(Note-1): Omission possible with both of (D1) and (D2) omission.
(Note-2): Local devices cannot be used.
(Note-3): Setting data (n1) to (D2) : Index qualification possible (except constant)
DP.CHGT2 (n2) (D1)(S1)(n1)
DP.CHGT2 (S1) (n2)
Command
[Condition]
[Instruction]
DP.CHGT2
(D2)
Command
Command
D.CHGT2
Command
(n1)
D.CHGT2 (n2) (D1)(S1)(n1)
D.CHGT2
(S1) (n2)
(D2)
(n1)
(n3)
(n3)
(n3)
(n3)