Mitsubishi Electric Q173DSCPU - Write Buffer Memory Data to Head Module: RTO

5 - 116
5 OPERATION CONTROL PROGRAMS
F/FS G
5.13.10 Write buffer memory data to head module : RTO
QDS
Ver.!
Format RTO(D1), (D2), (D3), (S), (n), (D4) Number of basic steps 11
[Usable data]
Setting
data
Usable Data
Bit device
Word device Constant
Calculation
expression
Bit
conditional
expression
Comparison
conditional
expression
16-bit
integer
type
32-bit
integer
type (L)
64-bit
floating
point
type (F)
Coasting
timer
16-bit
integer
type (K/H)
32-bit
integer type
(K/H, L)
64-bit
floating
point
type (K)
(D1) —
— — — — — — — —
(D2) —
— — — — — — — —
(D3) —
— — — — — — — —
(S)
— — — — — — — — —
(n) —
— — — — — — — —
(D4)
— — — — — — — — — —
: Usable
[Setting data]
Setting data Description Data type of result
(D1)
Axis No. of the target SSCNET
/H head module
(1 to 8)
—
(D2)
First I/O No. of the intelligent function module which
writes data.
(00 to FEH: First 2 digits when I/O No. is 3 digits)
(D3)
First address of the buffer memory of the intelligent
function module which writes data.
(S)
Start device No. which writing data are stored.
(n)
Number of words to be written (1 to 240)
(D4)
Complete devices
(D4+0): Self CPU device is made to turn ON by the
writing completion.
(D4+1): Self CPU device is made to turn ON by the
writing abnormal completion.
("D4+0" also turns ON at the abnormal
completion)
Ver.!
: Refer to Section 1.3 for the software version that supports this function.