APP - 43
APPENDICES
(1) System configuration
This section explains the system configuration and precautions for using the
Cognex vision system connection function.
Dedicated cable
Ethernet HUB
Ethernet cable
SSCNET (/H)
In-Sight Explorer
MT Developer2
R
In-Sight series
Up to 8 modules
R
Motion CPU with PERIPHERAL I/F
Servo amplifier
Alignment stage,
etc.
POINT
Depending on the vision system used, power supply by Power over Ethernet (PoE)
may be required.
The Motion CPU's PERIPHERAL I/F does not support PoE, so a PoE power
source equipment (PSE) is required.
To Next Page
Loading...
