Mitsubishi Electric Q173DSCPU - APPENDIX 3.4 Sample Program

APP - 59
APPENDICES
APPENDIX 3.4 Sample program
(1) Explanation of the operations
The following section gives an example of a program that executes positioning
control using the adjustment data recognized by the vision system as the target
data.
(2) Setting the vision system
Complete the following settings with In-Sight

Explorer.
Refer to the manual or help sections provided by Cognex for details on operating
and setting In-Sight

Explorer.
(a) Ethernet communication setting
Item Setting value
IP address 10.0.50.100
Port No.
Telnet 23
TCP/IP 3000
(b) Job setting
Item Setting value
Job name Worksearch1
TCP/IP protocol -
Format output string
1 Pattern_1.fIXTURE.x Floating point
2 Pattern_1.fIXTURE.y Floating point
(3) Vision system parameter setting
Complete the vision system parameter setting of MT Developer2.
(a) Ethernet Communication Line Setting
Vision System No.2
Setting item Description
IP address 10.0.50.100
Port No.
Telnet 23
TCP/IP 3000
User Name
According to the vision system
setting
Password
Status Storage Device D2000L
Error Flag M0