54
(4) When the Universal model QCPU is used
(a) QnU(D)(H)CPU
*1 Format ATA cards by a programming tool only. ( Page 240, Section 9.3)
*2 For the writing method to a memory card and USB cables, refer to the following.
Operating manual for the programming tool used
*3 For the GX Works2, GX Developer and GX Configurator versions that can be used with the Universal model QCPU,
refer to Page 634, Appendix 5.1.
Universal model QCPU
Memory card
*1
PC card
adapter
Personal Computer
(GX Works2, GX Developer,
GX Configurator)
*3
USB cable
(Connector type B)
*2
Memory card
*1
RS-232 cable
To Next Page
Loading...
