Mitsubishi Electric Q26UD(E)HCPU - Page 79

77
CHAPTER 4 INSTALLATION AND WIRING
4
4.2 Mounting a Module 4.2.3 Installation and removal of module
(b) Removal from QA6B
Disengage the hook from the module fixing hole (A) and then remove the module fixing projection from the module fixing
hole (B). Attempting to remove the module forcibly may damage the hook or module fixing projection.
Hold the module with both hands and
press the hook on the top of module.
Pull the module straight toward you
supporting it at its bottom while
pressing the hook.
Lift the module upwards and remove
the module fixing projection from the
module fixing hole (B).
Completed
Base unit
Module
connector
Module
Module fixing hole (A)
Hook
Module
fixing hole (B)