Mitsubishi Electric Q62DAN - 6.1.1 Programming example using the utility package

6 - 2
6 - 2
MELSEC-Q
6 PROGRAMMING
6.1.1 Programming example using the utility package
(1) Operating the utility package
(a) Initial setting (Refer to Section 5.4.)
CH1, CH2 D/A conversion enable/disable setting ......... "Enable"
(b) Automatic refresh setting (Refer to Section 5.5.)
CH1, CH2 Digital value ........ "D11, D12"
Error code ............................ "D13"
(c) Writing the intelligent function module parameters
(Refer to Section 5.3.3.)
Write the intelligent function module parameters to the CPU module.
This operation is performed using the parameter setting module selection
screen.
6