Mitsubishi Electric Q62DAN - 7.3.4 When user range setting is used and initial setting was made with GX Configurator-DA (other system is unavailable)

7 - 19 7 - 19
MELSEC-Q
7 ONLINE MODULE CHANGE
7.3.4 When user range setting is used and initial setting was made with GX Configurator-DA
(other system is unavailable)
(1) Conversion disable
(a) On the Operating condition setting window of GX Configurator-DA, set
"Disable" in the Setting value field of CH
D/A conversion enable/disable
setting, and click the [Execute test] button.
Confirm that conversion has stopped with the actual analog output value.