Mitsubishi Electric Q62DAN - APPENDICES; Appendix 1 Function upgrade for the D;A converter module; Appendix 1.1 A comparison of functions of the D;A converter module

App - 1 App - 1
MELSEC-Q
APPENDICES
APPENDICES
Appendix 1 Function upgrade for the D/A converter module
The D/A converter modules of function versions B and C have more functions than the
conventional model (function version A).
This section describes a comparison of functions of the D/A converter module based
on the function additions, combinations with GX Configurator-DA software version and
precautions when replacing the module.
Appendix 1.1 A comparison of functions of the D/A converter module
The following table indicates the functions supported by the corresponding function
versions.
Function Function version A Function version B Function version C
D/A conversion enable/disable function
D/A output enable/disable function
Synchronous output function
Multiple CPU system compatibility
Analog output test during programmable controller CPU STOP
Resolution mode
— — —
Normal resolution mode
High resolution mode
High resolution mode status flag (X8)
Online module change
Switching between normal mode and offset/gain setting mode
— — —
Dedicated instruction (G(P).OFFGAN)
Buffer memory (Mode switching setting) and Operating
condition setting request (Y9)
GX Configurator-DA
Intelligent function module switch setting
: Compatible : Not compatible
App