2 - 7
2 - 7
MELSEC-Q
2 SYSTEM CONFIGURATION
POINT
The serial number displayed on the Product information list dialog box of GX
Developer may differ from that on the rating plate and on the front of the module.
• The serial number on the rating plate and front part of the module indicates the
management information of the product.
• The serial number displayed on the Product information list dialog box of GX
Developer indicates the function information of the product.
The function information of the product is updated when a new function is added.
(2) Checking the software version of GX Configurator-DA
The software version of GX Configurator-DA can be checked by selecting [Help]
[Product information] of GX Developer.
Software version
(In the case of GX Developer Version 7)
REMARK
The version indication for the GX Configurator-DA has been changed as shown
below from the SW0D5C-QDAU-E 60G upgrade product.
Previous product Upgrade and subsequent versions
SW0D5C-QDAU-E 60G
GX Configurator-DA Version 1.10L
To Next Page
Loading...
