5 - 15 5 - 15
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-DA)
5.4 Initial Setting
[Purpose]
Set D/A conversion enable/disable with an initial setting parameter. Setting
parameters in the Initial setting window can omit parameter settings with
sequence program.
[Operating procedure]
"Start I/O No.
1
" "Module type" "Module model name" Initial setting
1: Enter the start I/O No. in hexadecimal.
[Setting window]
[Explanation of items]
(1) Setting contents
Set whether D/A conversion is "Enable" or "Disable" for each channel.
(2) Command button
Make text file
Creates a file containing the data in text file format window.
End setup
Saves the set data and ends the operation.
Cancel
Cancels the setting and ends the operation.
To Next Page
Loading...
