5 - 19 5 - 19
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-DA)
5.6 Monitor/Test
5.6.1 Monitor/test screen
[Purpose]
Start buffer memory monitoring/testing and I/O signal monitoring/testing,
operating condition setting, offset/gain settings (refer to Section 5.6.2, 5.6.3),
pass data (refer to Section 5.6.5, 5.6.6) from this window.
[Operating procedure]
Select monitor/test module window "Start I/O No.
1
" "Module type"
"Module model name"
Monitor/test
1 Enter the start I/O No. in hexadecimal.
The window can also be started from System monitor of GX Developer
Version 6 or later.
Refer to the GX Developer Operating Manual for details
[Setting screen]
X/Y monitor/test
1)
To Next Page
Loading...
