1 - 2 1 - 2
MELSEC-Q
1 OVERVIEW
(8) Analog output HOLD/CLEAR function
This function is set to either retain or clear the analog output value when the CPU
module is in the STOP status or when a stop error occurs.
(9) Easy settings with GX Configurator-DA
The number of sequence programs can be reduced since GX Configurator-DA
(sold separately) allows the D/A converter module settings on the screen.
Also, GX Configurator-DA simplifies checking of the module settings and
operation status.
FB
1
can be automatically created from intelligent function module parameters
set in advance to use them in a sequence program.
1 FB is the function for making a circuit block used in a sequence program
repeatedly a part (FB) to use it in the sequence program.
This function can improve the efficiency of program development and
minimize program bugs to improve program qualities.
For the details of FB, refer to "GX Developer Version 8 Operating Manual
(Function Block)."
1
To Next Page
Loading...
