7 - 14 7 - 14
MELSEC-Q
7 UTILITY PACKAGE (GX Configurator-CT)
7.5 Auto Refresh
[Purpose]
Set the QD62 (E/D) buffer memory to be automatically refreshed, for each
channel.
Set the following auto refresh setting parameters:
• Present value • Periodic pulse counter previous value
• Latch count value • Sampling/periodic counter flag
• Sampling count value • Overflow detection flag
• Periodic pulse counter present value
This auto refresh setting eliminates the need for reading and writing by sequence
programs.
[Operating procedure]
"Start I/O No. " "Module type" "Module model name" Auto refresh
Enter the start I/O No. in hexadecimal.
[Setting screen]
To Next Page
Loading...
