2 - 7 2 - 7
MELSEC-Q
2 SYSTEM CONFIGURATION AND AVAILABLE FUNCTIONS
(d) Communication using the pre-defined protocol
( : Available , : Not available)
Function
System configuration
Reference section
1 : 1 n : 1 1 : n m : n
Data transmission/reception
Chapter 8
Operating
In general, if data communication is performed using a system configuration of
other than 1:1 connection mode, the following points should be well noted.
• Avoid simultaneous transmission.
• Discard data received other than that addressed to the local station.
To Next Page
Loading...
