Mitsubishi Electric QJ71GF11-T2 - Setting in the Local Stations; Setting in the Master Station

155
CHAPTER 8 FUNCTIONS
8
8.3 IP Packet Transfer Function 8.3.2 How to set the IP packet transfer function
(b) Setting in the master station
Remark
When configuring the setting in the submaster station, set the same network address as that of the master station.
(c) Setting in the local stations
The IP address setting is not required for the local stations.
The same network address as the master station is automatically assigned to the first and second octets. The
network number of the own station is assigned to the third octet, and the station number of the own station is
assigned to the fourth octet.
1. Open the "Network Operation Settings" window.
Project window [Parameter] [Network
Parameter] [Ethernet/CC IE/MELSECNET]
button
2. In the "Set IP address" field, set the network
address.
Follow the rules to set the address. ( Page 149,
Section 8.3.2 (1))