205
CHAPTER 8 FUNCTIONS
8
8.8 Submaster Function
8.8.7 Precautions
(10)Access to the specified master station and submaster station in transient
transmission
Access to the specified master station and submaster station cannot be performed using GX Works2 or dedicated
instructions in the following modules:
• A master/local module with a serial number (first five digits) of "14022" or earlier
• A slave station that does not support access specifying the master station and submaster station
Access destination specified in
an unsupported module
Access destination
Master station (station number 0)
The master operating station is always accessed.
When the submaster station is operating as a master operating station, the
submaster station is accessed.
Submaster station (station numbers 1
to 120)
The submaster operating station is always accessed.
When the master station is operating as a submaster operating station, the master
station is accessed.
To Next Page
Loading...
