Mitsubishi Electric R16MTCPU - Peripheral Device Configuration

1 SYSTEM CONFIGURATION
1.1 Motion System Configuration
17
1
Peripheral device configuration
Ethernet configuration
*1 Corresponding Ethernet cables
■Selection criterion of cable
• Category : 5 or higher
• Diameter of lead: AWG26 or higher
• Shield: Copper braid shield and drain wire or copper braid shield and aluminium layered type shield
Part name Connection type Cable type Ethernet standard Specification
Ethernet cable Connection with HUB Straight cable 10BASE-T Compliant with Ethernet standards, category 5 or
higher.
• Shielded twisted pair cable (STP cable)
100BASE-TX
Direct connection Straight cable
Crossover cable
10BASE-T
100BASE-TX
Ethernet cable
*1
Personal computer
Motion CPU module
(R64MTCPU/R32MTCPU/
R16MTCPU)