102
3 TROUBLESHOOTING
3.2 Checking the State of the Module
3.2 Checking the State of the Module
The following functions are available in the "Module Diagnostics" window of the A/D converter module.
Error Information
Check the description and the actions of the errors that have occurred.
[Diagnostics] [System Monitor] Right-click the module to be checked. "Module Diagnostics"
FUNCTIONS Application
Error Information Displays the description of errors that have occurred.
Clicking the [Event History] button displays the errors that have occurred on
the network and the history of the errors detected and the operations
executed on each module.
Module Information List Displays each status information of the A/D converter module.
Item Description
Status Major: An error such as a hardware failure or memory failure. The module stops operating.
Moderate: An error, such as a parameter error, which affects module operation. The module stops
operating.
Minor: An error such as a communication failure. The module continues operating.
Detailed Information Displays detailed information about each error (maximum of 3 pieces).
Cause Displays the detailed error causes.
Corrective Action Displays the actions to eliminate the error causes.
To Next Page
Loading...
