Mitsubishi Electric R60AD8-G - Appendix 4 Dedicated Instructions; Instruction List

APPX
Appendix 4 Dedicated Instructions
205
A
Appendix 4 Dedicated Instructions
Instruction list
The following table lists the dedicated instructions that can be used in the A/D converter module.
For details on the dedicated instructions, refer to the following.
 MELSEC iQ-R Programming Manual (Module Dedicated Instructions)
Instruction Description
G(P).OFFGAN Switches normal mode to offset/gain setting mode.
Switches offset/gain setting mode to normal mode.
G(P).OGLOAD Reads out the offset/gain setting value in the user range setting to write it into the CPU module.
G(P).OGSTOR Restores the offset/gain setting value in the user range setting stored in the CPU module into the A/D converter module.