Mitsubishi Electric R60AD8-G - Firmware Version for SIL2 Mode; Reference Product

240
8 SYSTEM CONFIGURATION
8.3 Firmware Version for SIL2 Mode
8.3 Firmware Version for SIL2 Mode
For application in SIL2 mode, use the R60AD8-G with the following conditions.
• Use a module with firmware version 02 or later.
• Use a module with production information (first four digits) of 0207 or later.
For how to check the firmware version and production information, refer to the MELSEC iQ-R Module Configuration Manual.
8.4 Reference Product
Connector/terminal block converter module for the R60AD8-G
Connector/terminal block converter module for the R60DA8-G for diagnostics
Terminal module for the RY40PT5B
Relay
Product Model Remarks Contact
Connector/terminal block converter module FA1-TBS40ADGN  Mitsubishi Electric Engineering Co., Ltd.
FA-LTB40ADGN 
Special cable FA-CBL05Q68ADGN Cable length: 0.5m
FA-CBL10Q68ADGN Cable length: 1.0m
FA-CBL20Q68ADGN Cable length: 2.0m
FA-CBL30Q68ADGN Cable length: 3.0m
Product Model Remarks Contact
Connector/terminal block converter module FA1-TBS40DAG  Mitsubishi Electric Engineering Co., Ltd.
FA-LTB40DAG 
Special cable FA1-CBL05R60DA8G Cable length: 0.5m
FA1-CBL10R60DA8G Cable length: 1.0m
FA1-CBL20R60DA8G Cable length: 2.0m
FA1-CBL30R60DA8G Cable length: 3.0m
Product Model Remarks Contact
Terminal module FA-THE16YTR20S  Mitsubishi Electric Engineering Co., Ltd.
Special cable FA-CBL06TMV20 Cable length: 0.6m
FA-CBL10TMV20 Cable length: 1.0m
FA-CBL20TMV20 Cable length: 2.0m
FA-CBL30TMV20 Cable length: 3.0m
Product Model Remarks Contact
Analog switching module M2MNV-13-R/CE-X: Special
Product No.36111
 M-System Co., Ltd.