11 PARAMETER SETTINGS
11.2 Application Settings
295
11
11.2 Application Settings
Setting procedure
Open "Application setting" of the engineering tool.
1. Start Module Parameter.
[Navigation window] [Parameter] [Module Information] Ta rge t modu l e [Module Parameter] [Application
setting]
2. Double-click on an item to be changed and enter a setting value.
• Item where a value is selected from a drop-down list
Click the [] button of the item to be set to display a drop-down list. Select an item.
• Item where a value is entered into a text box
Double-click on the item to be set and enter a numerical value.
To Next Page
Loading...
