Mitsubishi Electric R64MTCPU - End

106
3 MOTION SFC PROGRAMS
3.8 END
3.8 END
Processing details
• Ends a program. (In this case of an event task or NMI task, operation changes with end operation setting of the program
parameter. (Page 294 Program Parameters)
• Making a subroutine call will return to the call source Motion SFC program.
Precautions
• END may be set a multiple number of times in one program.
• END cannot be set between a parallel branch and a parallel coupling.
• The output is held after the Motion SFC program is ended by END.
Name Symbol Setting range
END 
END