Mitsubishi Electric R64MTCPU - Remainder

4 OPERATION CONTROL PROGRAMS
4.5 Binary Operations
137
4
Remainder: %
Setting data
■Usable data
: Usable
■Description, data type of result
Processing details
• The data specified with (S1) is divided by the data specified with (S2) to find a remainder.
• When (S1) and (S2) differ in data type, the data of the smaller data type is converted into that of the greater type before
operation is performed.
Operation error
An operation error will occur if:
•(S2) is 0.
• (S1) or (S2) is an indirectly specified device and its device No. is outside the range.
Program example
■Program which divides K456 by #0 and substitutes a remainder to W0
Format Number of basic steps Usable steps
F/FS G
(S1)%(S2) 7 
Setting
data
Usable Data
Bit
device
Word device Constant Calculation
expression
Bit
conditional
expression
Comparison
conditional
expression
16-bit
integer
type
32-bit
integer
type (L)
64-bit
floating
point
type (F)
16-bit
integer
type
(K/H)
32-bit
integer
type
(K/H, L)
64-bit
floating
point
type (K)
(S1)   
(S2)   
Setting data Description Data type of result
(S1) Dividend data Data type (integer type) of (S1) or (S2)
which is greater (Integer type)
(S2) Divisor data
W0 = K456 % #0
87W0
123#0
456
%