Mitsubishi Electric R64MTCPU - Processing Time of Advanced Synchronous Control Dedicated Functions

APPENDICES APPENDIX
Appendix 1 Processing Times
331
A
Processing time of advanced synchronous control dedicated
functions
The operation processing times for advanced synchronous control dedicated functions are shown below. Operation
processing times can vary substantially depending on the number of cams and where they are saved. The values contained in
the following tables should therefore be taken as a set of general guidelines to processing time rather than as being strictly
accurate.
CAMRD instruction processing time
■Data format (stroke ratio cam)
■Data format (coordinate)
CAMWR instruction processing time
■Data format (stroke ratio cam)
■Data format (coordinate)
CAMMK instruction processing time
■Cam for rotary cutter
Cam resolution Processing time [ms]
Not saved (open area) Standard ROM SD memory card
256 0.02 54 82
4096 0.58 181 406
32768 3.76 2170 411
Cam resolution Processing time [ms]
Not saved (open area) Standard ROM SD memory card
256 0.04 53 120
4096 1.14 591 139
32768 4.11 2410 621
Cam resolution Processing time [ms]
Not saved (open area) Standard ROM SD memory card
256 0.02 42 76
4096 0.04 194 109
32768 3.81 2497 423
Cam resolution Processing time [ms]
Not saved (open area) Standard ROM SD memory card
256 0.04 55 106
4096 0.96 291 152
32768 4.18 3641 641
Cam resolution Processing time [ms]
Not saved (open area) Standard ROM SD memory card
256 0.26 34 74
1024 0.51 31 70
4096 2.7 32 71
32768 23 53 87