Mitsubishi Electric R64MTCPU - Checking with Engineering Tools

6 TROUBLESHOOTING
6.4 Checking With Engineering Tools
65
6
6.4 Checking With Engineering Tools
Specify the error cause by using MT Developer2 and GX Works3 to check the errors occurring and the history. Checking with
engineering tools enables more detailed information, error causes, and error corrections to be checked than checking LEDs.
Checking with MT Developer2
Check with the following function in MT Developer2.
• Motion CPU error batch monitor
Refer to the following for details.
Help of MT Developer2
Checking with GX Works3
Check with the following functions in GX Works3.
• System monitor
• Module diagnostics
• Event history
Refer to the following for details.
GX Works3 Operating Manual