Mitsubishi Electric RD62P2E - Appendices; Appendix 1 Module Label

52
APPENDICES
Appendix 1 Module Label
APPENDICES
Appendix 1 Module Label
The functions of the high-speed counter module can be set by using module labels.
Module labels of I/O signals
The module label name of an I/O signal is defined with the following structure:
"Module name"_"Module number"."I/O signal"["(Channel)"].b"Label name" or
"Module name"_"Module number"."I/O signal"["(Channel)"].b"Label name"_D
Ex.
RD62_1.stnInputSignal[0].bCoincidenceOutputPoint1CounterValueLarge_D
■Module name
The character string of a module model name is given.
■Module number
A number starting from 1 is added to identify modules that have the same module name.
■I/O signal
The character string that represents an input or output signal is given (Input signal: stnInputSignal, Output signal:
stnOutputSignal). Note that RD62_(x).bReady does not include this string.
■Channel
The channel number corresponding to a module label is given. If the object belongs to CH1, 0 is given. If the object belongs to
CH2, 1 is given.
■Label name
The label identifier unique to a module is given.
■_D
This string indicates that the module label is for the direct access input (DX) or direct access output (DY). A module label
without the string is for the input (X) or output (Y) of the refresh processing.