5 - 8
5.1 Installation
5
INSTALLATION AND UNINSTALLATION
After installing MES Interface Function Configuration Tool and DB Connection Service
Setting Tool, the following icons are registered.
*1
*1 For Windows Vista
®
or later, "DB Connection Service Client" is installed, and its icon
(DBCnctClient) is shown in the list appeared by clicking [Startup].
(3) Settings when Windows Firewall function is enabled
If the firewall function of the operating system and the security software is enabled,
make one of the following settings.
1) Disable the firewall function.
2) Set the following programs to Exception.
*1 The settings are required for Windows Vista
®
or later.
For the setting method, refer to the manual or online help of the operating system or security software used.
Figure 5.2 Icon registration
Program Name
Execution file storage location
(if a folder for installation destination is
C:\MELSEC\MESIF\)
MES Interface Function Configuration Tool is
installed.
MES Interface Function Configuration
Too l
C:\MELSEC\MESIF\MIFConfigTool.exe
DB Connection Service and DB Connection
Service Setting Tool Version 2 (64-bit) is
installed.
DB Connection Service Setting Tool
Version 2 (64-bit)
C:\MELSEC\MESIF\DBCnctConf2_64.exe
DBConnector2_64 C:\MELSEC\MESIF\DBConnector2_64.exe
DBCnctClient2_64 C:\MELSEC\MESIF\DBCnctClient2_64.exe
DB Connection Service and DB Connection
Service Setting Tool Version 2 (32-bit) is
installed.
DB Connection Service Setting Tool
Version 2 (64-bit)
C:\MELSEC\MESIF\DBCnctConf2_32.exe
DBConnector2_32 C:\MELSEC\MESIF\DBConnector2_32.exe
DBCnctClient2_32 C:\MELSEC\MESIF\DBCnctClient2_32.exe
DB Connection Service and DB Connection
Service Setting Tool Version 1 is installed.
DB Connection Service Setting Tool
Version 1
C:\MELSEC\MESIF\DBCnctConf.exe
DBConnector C:\MELSEC\MESIF\DBConnector.exe
DBCnctClient
*1
C:\MELSEC\MESIF\DBCnctClient.exe
To Next Page
Loading...
