To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric WD-82840 and is the answer not in the manual?
General| Screen Size | 82 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Type | DLP |
| HDMI Ports | 4 |
| Weight | 111.5 lbs |
| Aspect Ratio | 16:9 |
| Display Technology | DLP |
| Smart TV | No |
| HDR | No |
| Refresh Rate | 120 Hz |
| USB Ports | 2 |
| Wi-Fi | No |
| Bluetooth | No |
Introduces safety requirements specific to LASERVUE models.
Lists warnings and cautions for safe operation and service.
Specific caution regarding radiation exposure during service procedures.
Step-by-step guide to remove the back cover.
Procedure to remove the electrical chassis.
Steps for removing the light source unit.
Procedure to remove the optical engine assembly.
Instructions for removing the screen assembly.
Procedure for factory reset of service settings.
Accessing and interpreting the error code log.
Detailed steps for 20-point geometry alignment.
Procedures for transferring service data.
Customer-level resets and initializations for troubleshooting.
General disassembly and parts replacement for DLP models.
Steps to remove the back cover for DLP models.
Steps for removing the chassis assembly.
Steps to remove the PWB-MAIN.
Steps to remove the optical engine assembly.
Overview of service adjustments for DLP models.
Procedure for HVPOS adjustment.
Continued geometry alignment steps.
Tips on resets and initializations for DLP.
Understanding LED status and diagnostics for DLP.
List of error codes and their causes for DLP.
