To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Heavy Industries DXK06ZSA-W and is the answer not in the manual?
General| Cooling Capacity | 1.7 kW |
|---|---|
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Energy Efficiency Rating (EER) | 3.50 |
| Energy Efficiency Ratio (Cooling) | 3.50 |
Explains the meaning of WARNING and CAUTION symbols used in the manual.
Safety advice for handling refrigerants, including warnings and precautions.
Precautions related to the installation of the air conditioner, including electrical safety.
Guidelines and warnings for safe operation of the air conditioner, including child safety.
Additional cautions for operating and cleaning the unit, covering potential hazards and maintenance.
Warnings and advice regarding repairs, modifications, and relocating the air conditioner unit.
Advice on how to use the air conditioner efficiently for comfort and energy saving.
Identifies and describes the parts of the indoor unit, including air inlet, filters, louvers, and flaps.
Identifies and describes the parts of the outdoor unit, including fan, heat exchanger, and drain hose.
Details about the allergen clear and photocatalytic washable deodorizing filters used in the unit.
Explains the indicators and buttons on the indoor unit's display section and their functions.
Lists and describes the accessories included with the air conditioner, such as remote control and batteries.
Explains the different buzzer sounds produced by the remote control and their meanings.
Step-by-step instructions for inserting batteries into the remote control.
Instructions on how to attach and use the remote control holder.
Lists precautions to take when handling and using the remote control.
Troubleshooting tips for when the remote control is not working correctly.
How to operate the unit using the ON/OFF button on the unit itself when the remote is unavailable.
Procedure for setting remote control and indoor unit for dual air conditioner installation.
Instructions on how to lock and unlock the remote control to prevent accidental operation.
Steps to set the left/right airflow range to maximize air conditioning coverage.
Guidance on how the installation location affects the optimal airflow range setting.
Detailed explanation of each button on the remote control and its function.
Shows what information is displayed on the remote control when the air conditioner is off.
Explains how the remote control sends signals to the air conditioner unit.
Step-by-step guide to set the current time and day of the week on the remote control.
How to select and use the AUTO mode for automatic cooling or heating based on room temperature.
How to adjust the temperature setting while the unit is in AUTO mode.
Instructions on how to change the fan speed settings for different operation modes.
Guide to selecting and operating the unit in COOL, HEAT, DRY, or FAN modes.
Specifies the recommended operating temperature and humidity ranges for optimal performance.
Explains how the HEAT mode works, including its capacity and defrosting process.
Instructions for adjusting the up/down and left/right airflow direction.
How to enable 3D AUTO operation for efficient air conditioning of the entire room.
How to set the sleep timer to automatically stop the unit after a set time.
How to set the timer to automatically stop the unit at a specific time.
How to set the timer to start the unit automatically at a specific time.
How to set both SLEEP TIMER and ON TIMER for combined operation.
How to set both ON TIMER and OFF TIMER for combined operation.
How to use the Allergen Clear function to remove allergens from the filter.
Guide to setting up weekly timer programs for automatic operation throughout the week.
How to switch the weekly timer function on or off.
Steps to set individual timer programs (ON/OFF) for specific days and times.
How to set operation mode, fan speed, and other contents for programmed timer settings.
How to apply the same timer settings to all days of the week.
Instructions on how to cancel individual timer settings.
Instructions on how to cancel collective timer settings.
How to view or confirm the set weekly timer programs.
How to activate High Power mode for intensified cooling or heating for a limited time.
How to activate ECO mode for energy-saving operation with reduced cooling/heating output.
How to set the unit to maintain a comfortable temperature during absence or at night.
How to enable silent operation to reduce noise from the outdoor unit.
How to access the menu for various settings like brightness, self-clean, and preset.
Steps to adjust the brightness level of the unit's display.
How to run the Self Clean function to remove moisture and prevent mold growth.
How to save and recall preferred operation settings for future use.
Safety precautions to take before performing any maintenance on the unit.
Tasks for cleaning the air filter and the unit during the operational season.
Instructions on how to open, close, remove and install the air inlet panel.
Procedures for preparing the unit for the end of the season.
Procedures for preparing the unit for the beginning of the season.
Detailed guide on installing, inspecting, and replacing the air-cleaning filters.
Guidelines for selecting an appropriate location for installing the air conditioner.
Advice on minimizing noise and vibration during installation and operation.
Checks to perform when the air conditioner does not work or has poor cooling/heating.
Explains common airflow and noise issues encountered during operation.
Covers other operational notices like unit restart, smells, and remote control reception.
Lists specific situations where immediate dealer contact is necessary for troubleshooting.
Explains the auto restart function and its behavior after a power outage.
Details on operating multiple air conditioners simultaneously and mode responses.
Explanation of the refrigerant recovery operation and its effects on performance.
Interprets different flashing patterns of the RUN light to diagnose errors.
Interprets the TIMER light status to diagnose specific error codes.
Interprets various flashing patterns of the RUN light to diagnose specific errors.
Interprets specific states of the RUN light to diagnose errors.
Interprets the RUN light flashing twice to diagnose specific errors.
Interprets the RUN light flashing seven times to diagnose specific errors.
Shows how the RUN and TIMER lights display when the unit is in DRED mode.
Illustrates the display behavior when DRED mode and defrost function are active simultaneously.
