To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Heavy Industries FDC121KXZEN1 and is the answer not in the manual?
General| Cooling Capacity | 12.1 kW |
|---|---|
| Heating Capacity | 13.5 kW |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Energy Efficiency Rating (Cooling) | A++ |
| Energy Efficiency Rating (Heating) | A+ |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Indoor Unit Dimensions (W x H x D) | 1280 x 320 x 240 mm |
| Outdoor Unit Dimensions (W x H x D) | 970 x 980 x 370 mm |
| Type | Split System Air Conditioner |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
Details wired remote control models RC-EX3A and RC-E5, their functions, displays, and operating methods.
Explains wired remote control functions like CPU reset, power failure compensation, and various settings.
Covers indoor unit operations, including functional items during cooling/heating and timer settings.
Describes outdoor unit controls, fan speed, defrost operations, and protective functions for optimal performance.
Provides a fundamental guide to troubleshooting by connecting the Mente PC for data analysis and diagnosis.
Details diagnostic steps for checking inverter PCB functionality and inspecting short-circuits on power transistor modules.
Lists inspection displays for indoor/outdoor units and option controls, detailing error codes and their classifications.
Explains changing outdoor unit control settings via the 7-segment display and DIP switches.
Details selectable functions for CnS1 and CnZ1 connectors on the outdoor PCB using the 7-segment display.
Defines how the outdoor unit's operation mode (Stop, Cooling, Heating) is determined based on indoor unit signals.
Outlines the priority rules for operation mode selection, which can be adjusted via the 7-segment setting [P01].
Explains how target pressures are adjusted based on indoor load conditions for optimal cooling and heating efficiency.
Describes the 7-segment display's function for showing operational data and aiding in malfunction diagnosis.
