Mitsubishi Heavy Industries FDCM100VNX-W - RC-HY20;40-W-An Excellent Choice; Quick Guide

EN-7
General / Quick guide
Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on
page 8.
How to scroll through menus and make different settings is
described on page 10.
Set the indoor climate
2X
Set th e indoo r climate
INDOOR CLIMATE
HOT WATER
MYINSTALLATION
INFO
1 2 3 4
20ºC
10ºC
30ºC
-5ºC
TEMPERATURE HEATING 1.1.1
?
The mode for setting the indoor temperature is accessed by
pressing the OK button twice, when in the start mode in the
main menu. Read more about the settings on page 13.
Increase hot water volume
Increas e hot wate r volume
2X
1X
INDOOR CLIMATE
HOT WATER
MYINSTALLATION
INFO
TEMPORARY LUX 2.1
one time increase
3 hrs
6 hrs
12 hrs
?
To temporarily increase the amount of hot water (if a hot water
heater is installed to your RC-HY20/40-W), first turn the
control knob to mark menu 2 (water droplet) and then press the
OK button twice. Read more about the settings on page 21.
In event of disturbances in comfort
If a disturbance in comfort of any type occurs there are some
measures that can be taken before you need to contact your
installer. See page 36 for instructions.
The serial number can be found on the top of the cover for the
controller and in the info menu (menu 3.1).
Serial number
CAUTION
Always give the product's serial number when reporting a
fault.
RC-HY20/40-W – An excellent choice
RC-HY20/40-W is an electric controller, which has been
introduced to supply your home with inexpensive and
environmentally friendly heating. Heat production is reliable
and economical with a MHI air/water heat pump.
An additional heater (for example electric/oil/gas boiler) can
engage automatically if something unexpected should occur or
as reserve operation.
Excellent properties for RC-HY20/40-W:
■
Easy to read display
The controller has an easy-to-read colour display with easy-to-
understand menus that facilitate setting a comfortable indoor
climate.
■
Checks all of your installation
RC-HY20/40-W is installed together with one or more
compatible MHI air/water heat pumps. The controller is
connected to the heat pumps which means that all important
settings can be made in RC-HY20/40-W. RC-HY20/40-W can
control the whole heating installation and support many
accessory functions.