To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Heavy Industries FDTC60VD and is the answer not in the manual?
General| Cooling Capacity | 6.0 kW |
|---|---|
| Heating Capacity | 6.8 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Energy Efficiency Ratio (Heating) | 3.61 |
Details on how to control the SRK, SRF, and SRR series units using the remote controller.
Explains the wired and wireless remote controllers for the FDTC series air conditioners.
Explains how to control operation permission and prohibition using card key switches or timers.
Details various protective control functions for the air conditioning system to prevent damage.
Troubleshooting procedures, self-diagnosis, service mode, and phenomenon analysis for SRK, SRF, and SRR series.
Covers diagnosing microcomputer circuits and troubleshooting flows for the FDTC series.
Provides wiring diagrams and explanations for outdoor unit electrical connections.
Details electrical wiring diagrams and connections for various types of indoor units.
Provides instructions and specifications for the proper installation of outdoor units.
Covers installation procedures for various indoor unit types like wall-mounted, floor-standing, and ceiling concealed.
Explains the drainage system and installation requirements for the outdoor unit.
Details the procedure for connecting power supply and inter-unit communication cables.
Provides instructions for connecting refrigerant pipes, including flare nut tightening and gas leakage testing.
