Mitsubishi Heavy Industries RC-EX3D - Ventilation Operation; Initial Settings; Home Leave Mode; User Setting Initial Settings

−17−−16−
2
The External ventilation screen is displayed.
If the
Venti. ON button is tapped, the ventilation operation starts.
To stop the ventilation operation, tap the
Venti. OFF button.
■
In case that the Ventilation is set “Interlocking”, the ventilation operates interlocked with Run/Stop operation of air conditioner (refer to Installation
Manual).
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
External ventilation .
■
The ventilation operation is enabled in case that the External ventilation is set “Independent” (refer to the installation manual for details).
■
In case that the External ventilation is set “Disable” or “Interlocking” the ventilation operation is disable.
Ventilation operation (when ventilation device is installed)
The ventilation is turned on or off if the ventilation device is installed.
External ventilation
Venti. OFF
Back
Select Venti. ON/OFF.
Venti. ON
Clock setting
Time Back
Set the date.
yy
mm
Initial settings
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings .
2
When the “Initial settings” menu screen is displayed, tap a desired item.
• Clock setting
• Date & time display
• Summer time
• Contrast
• Backlight
• Controller sound
• Operation lamp luminance
Initial settings
Controller sound
Operation lamp luminance
Previous Back
Select the item.
Initial settings
Clock setting
Date & time display
Summer time
Contrast
Backlight
Next Back
Select the item.
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings
⇒
Clock setting .
2
The “Clock setting” screen is displayed.
Set the “dd/mm/yy” with the ▲
▼ buttons.
Tap the
Time button after the
setting.
■
The “clock setting” is necessary for the
following settings.
• Peak-cut timer
•
Set ON timer by clock, Set OFF timer
by clock
• Weekly timer
• Outdoor unit silent mode timer
•
Filter sign reset, Setting next cleaning
date
■
Clock setting
You can set and correct the current date and time.
dd
3
Set the “hour : minute” with the
▲ ▼ buttons on the clock
setting screen.
Tap the
Set button after the
setting.
To change “dd/mm/yy” tap the
Date button.
Clock setting
Date Back
Set the time.
Set
PM
PJZ012A231_EN.indd 17PJZ012A231_EN.indd 17 2023/7/24 10:49:392023/7/24 10:49:39