Mitsubishi Heavy Industries RC-EX3D - Operations on menu screens

−19−−18−
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings
⇒
Summer time .
2
The Summer time setting screen is displayed.
Changing from
Disable to Enable … (Current time + 1 hr) is displayed.
Changing from Enable to Disable … (Current time – 1 hr) is displayed.
■
Summer time
You can adjust the current time by one hour.
Summer time
Enable
Disable
Back
Select the item.
2
The Contrast Adjustment screen is
displayed.
Tap the “Contrast” on the Initial settings
menu screen. The contrast on the
screen changes by tapping the
Dark or Bright button to select a
desired contrast.
3
Tap the Set button after the
setting.
4
Tap the Adjust button to
display the Upper/Lower Contrast
screen.
5
The contrast of the lower half of the
screen changes when you tap the
Dark / Bright button. Adjust the
contrast so that the upper and lower
halves of the screen match.
6
After you make the settings, tap the
Set button.
[When the contrast differs between the top and bottom of the screen]
■
Contrast
You can adjust the contrast of the LCD.
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings
⇒
Contrast .
Contrast
Back
Set
Adjust
Dark
Bright
Upper/Lower Contrast
Back
Set
Adjust contrast between upper and lower.
Dark
Bright
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings
⇒
Backlight .
3
Tap the Set button after the setting.
2
The Backlight setting screen is displayed.
Tap the ON or OFF buttons for the backlight lighting and the lighting Period (5 - 90 sec, at 5-sec intervals).
ON … The “Backlight” lights when the LCD is tapped.
If no operation is made for the set time, it turns off automatically.
OFF … The “backlight” does not light even if the LCD is tapped.
■
Backlight
You can turn ON/OFF the backlight and set the lighting period.
Backlight
Back
Select the item.
Set
OFF
ON
Seconds
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings
⇒
Date & time display .
2
The Clock setting screen is displayed.
Tap
OFF / ON for the Date and time.
Tap
OFF / ON for A day of the week.
Tap Display method “12H or 24H”.
12H Hours … If it is 3:50 PM, it displays “3:50PM”.
24H Hours … If it is 3:50 PM, it displays “15:50”.
Set the position of AM/PM.
Set
Infront ... “PM3:50” is displayed.
Set Back ... “3:50PM” is displayed.
3
Tap the Set button after the setting.
■
Date & time display
You can set and correct the date & time display.
Date & time display
Set Back
Select setting
Infront Position of AM / PM
12HDisplay method
ONA day of the week
ONDate & time
Back
24H
OFF
OFF
PJZ012A231_EN.indd 18PJZ012A231_EN.indd 18 2023/7/24 10:49:392023/7/24 10:49:39