−21−−20−
■
Set ON timer by hour
When the set time elapses, the air conditioner starts.
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
Timer
⇒
Set ON timer by hour
.
2
The Set ON timer by hour setting
screen is displayed.
Select desired hours for the period to
start operation by timer with the
▲ ▼ buttons.
Range of setting time: 1 to 12 hours (at
1-hr intervals)
3
When operating conditions at the start
of operation are set, tap the
Next button. (
☞
4 )
When operating conditions are not set,
tap the
Set button.
4
Set the following operating conditions.
1
Warming up ON/OFF (the Main
R/C only)
2
Operation mode …
☞
5
3
Set temp …
☞
6
4
Fan speed …
☞
7
■
Warming up setting can be made with the
main R/C only.
■
Set the operation mode before setting the
set temperature.
• To warm up the room temperature closed to the set temperature at the set start time of the operation, the microcomputer estimates the start time of the operation based on the last warming up operation and
starts the operation 5 to 60 minutes earlier.
• When the warming up is turned ON, set the timer at one hour earlier or more than the start operation by timer.
If it is set in less than one hour, a message “Warming up cancelled” is displayed on the screen. (This is used as the Set ON timer by hour and clock.)
Advice Warming up
Cooling
Set ON timer by hour
Set Back
Set temp
Select the item to change.
Details
Previous
Warming up
Set ON timer by hour
Set Back
hours
Tap ▲▼ to set clock time & tap [Set].
A/C will start at the set hours later.
CancelNext
5
Tap a desired operation mode.
If the
No setting button is tapped, it
starts operation at the last action.
(
☞
4 )
Cooling
Set ON timer by hour
No setting Back
Please select operation mode.
Fan
Heating
Dry
Auto
7
Tap a desired fan speed.
If the
No setting button is tapped, it
operates at the last action. (
☞
4 )
8
After setting the desired contents at the
screen of the step 4 on the previous
page, tap the
Set button.
Operation will start at set hours later.
6
Select a desired temperature (at 1°C
intervals) with the
▲ ▼ buttons. Or tap the
Auto button and select the auto
temp setting.
Tap the
Set button after the
adjustment. (
☞
4 )
When the
No setting button is
tapped, “
--
°C” is displayed, and it
starts operation at the last setting
temperature.
Set ON timer by hour
No setting Back
Select the fan speed.
Auto
Set ON timer by hour
No setting Back
Tap
▲▼
to set temp & tap [Set].
Auto
Set
■
Set OFF timer by hour
When the set time elapses, the air conditioner stops.
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
Timer
⇒
Set OFF timer by hour
.
2
The Set OFF timer by hour setting screen is displayed.
Select desired hours to stop operation with the
▲ ▼ buttons.
Range of setting time: 1 to 12 hours (at 1-hr intervals)
3
Tap the Set button after the setting.
Set OFF timer by hour
Set Back
hours
Tap ▲▼ to set clock time & tap [Set].
A/C will stop at the set hours later.
Cancel
PJZ012A231_EN.indd 20PJZ012A231_EN.indd 20 2023/7/24 10:49:402023/7/24 10:49:40
To Next Page
Loading...
