Mitsubishi Heavy Industries RC-EX3D - Confirm

−23−−22−
5
Screen to check contents of current
setting is displayed.
When the contents are changed or
new setting is added, select a
1
setting line No. and tap the
2
Change button.
6
Detail setting screen for the timer
setting contents is displayed.
1
Tap the
State button to switch
between “State Enable” and
“State Disable”.
2
Tap the
Type button to switch
between the “OFF timer” and the
“ON timer”.
3
Select a desired time (at 5-min
intervals) with the
▲ ▼ buttons.
4
In case of “ON timer” when the
Next button is tapped,
operating conditions at the start
of operation can be set. (
☞
7 )
Select a line & tap [Change].
Change
Weekdays
Weekly timer
State
Enable
Enable
Enable
Enable
Type Time
Enter Back
Next
ON
ON
ON
OFF
Mode Fan Temp
AutoAuto
1
2
11:00 AM
0:00 AM
0:00 AM
0:00 AM
Weekly timer
Set Back
State
Enable
Tap ▲▼ to set clock time & tap [Set].
Weekdays:No.1
Next
Type
ON
3
1
2
AM
7
Set the following operating conditions.
1
Warming up ON/OFF
(Operation starts 5 to 60 minutes
earlier in order to warm up the room
temperature closed to the set temp
at the set start time of operation.)
2
Operation mode …
☞
8
3
Set temp …
☞
9
4
Fan speed …
☞
10
■
Set the operation mode before setting the
set temperature.
9
Select a desired temperature (at 1°C
intervals) with the
▲ ▼ buttons. Or tap the
Auto button to select the Auto temp
setting.
Tap the
Set button after the
selection. (
☞
7 )
When the
No setting button is
tapped, “ -- °C” is displayed, and it
starts operation at the last setting
temperature.
8
Tap a desired operation mode.
When the
No setting button is
tapped, it operates with the same
operation mode at the last action.
(
☞
7 )
Weekly timer
No setting Back
Tap
▲▼
to set temp & tap [Set].
Auto
Set
Cooling
Weekly timer
Set Back
Set temp
Select the item to change.
Details
Previous
Warming up
Cooling
Weekly timer
No setting Back
Please select operation mode.
Fan
Heating Dry
Auto
10
Tap a desired fan speed.
When the
No setting button is
tapped, starts operation at the last
fan speed. (
☞
7 )
11
After setting desired contents at the
screen of 7 , tap the
Set button.
12
Display the setting contents check
screen. To register the setting, tap
the
Enter button.
(1) In case of group setting
(2-
1
Weekdays, 2-
2
Sat/Sun,
2-
3
All days setting), move to the
group setting screen. (
☞
13)
(2) In case of the individual setting
(2-
4
Each day setting), save the
setting and move to a day of the
week selection screen. (
☞
3 )
13
Display the group setting
acknowledge screen. Tap the
Yes
button and save the setting.
The display changes to a day of the
week setting check screen after
saving. (
☞
3 )
When making the setting after
changing a day of the week, repeat
the setting from the step 3 .
Weekly timer
No setting Back
Select the fan speed.
Auto
Weekly timer
Yes
Back
Do you want to apply group setting?
Select a line & tap [Change].
Change
Weekdays
Weekly timer
State
Enable
Enable
Enable
Enable
Type Time
Enter Back
Next
ON
ON
ON
OFF
Mode Fan Temp
AutoAuto
11:00 AM
0:00 AM
0:00 AM
0:00 AM
1
When you tap the Conrm button on the Timer menu screen, the contents of the current timer settings are displayed.
■When the warming up is set, “ ” is displayed in front of the operation mode on conrmation screen.
■
Conrm
Conrm
Back
Timer type
OFF:Hours No setting
ON:Hours No setting
OFF:Clock No setting
ON:Clock No setting
Weekly (Wed) ON
Sleep 240min. OFF
Setting status
5:00 PM
PJZ012A231_EN.indd 22PJZ012A231_EN.indd 22 2023/7/24 10:49:422023/7/24 10:49:42