−25−−24−
Select the language
Select the language to be displayed on the R/C.
[Selecting the language with the
Select the language
button]
1
Tap the Select the language button on the TOP screen while the air conditioner is stopped.
■
Depending on how the Permission/Prohibition setting (
☞
Refer to user’s manual.) is set, the administrator password input screen may be
displayed.
2
The menu for select the language is displayed.
Select the language to be displayed on the R/C and tap the
Set button.
You can select from the following languages:
English/German/French/Spanish/Italian/Dutch/Turkish/Portuguese/Polish
[Starting control with
F1
or
F2
switch]
Change the F1 ( F2 ) switch function to the silent mode control in the F1 ( F2 ) function setting.
When you press the F1
( F2 ) switch, the administrator password input screen is displayed. After you enter the password, the silent mode control will start.
To terminate the silent mode control, press the F1
( F2 ) switch again.
■
This operation is to select enable/disable of silent mode control. You cannot start the operation with the F1
( F2 ) switch during stop. Start the operation with the
Run/Stop
switch.
[Selecting the language with the
Menu
button]
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
Select the language .
■
Depending on how the Permission/Prohibition setting (
☞
Refer to user’s manual.) is set, the administrator password input screen may be displayed.
2
The menu for setting the language selection is displayed.
Select a language to be displayed on the R/C and tap the
Set button.
PJZ012A231_EN.indd 24PJZ012A231_EN.indd 24 2023/7/24 10:49:422023/7/24 10:49:42
To Next Page
Loading...
