─
29
─
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
Individual ap control , or
tap the
Change ap direction button on the TOP screen and select Ind. ap control , and then enter the
administrator password.
When one IU is connected to the R/C:
☞
3
When two or more IUs are connected to the R/C:
☞
2
Motion range (upper, lower, left, or right limit positions) of the ap at each blow outlet can be set to a desired range.
■
When the R/C is set as the sub R/C, the individual ap control cannot be set.
Individual ap control
• Individual ap control should be set when the unit is stopped.
• When you perform Individual ap control while the unit is in operation, the acknowledge screen for unit stop is displayed.
Advice
2
When two or more IUs are connected to the R/C, a list of IUs is
displayed. Tap the IU to be set.
IU select
Next Back
Select an IU address.
To Next Page
Loading...
