Mitsubishi Heavy Industries RC-EX3D - Initial Settings

─
36
─
Clock setting
Time Back
Set the date.
yy
mm
Initial settings
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings .
2
When the “Initial settings” menu screen is displayed, tap a desired
item.
• Clock setting ……
☞
page 36
• Date & time display ……
☞
page 37
• Summer time ……
☞
page 38
• Contrast ……
☞
page 38
• Backlight ……
☞
page 39
• Controller sound ……
☞
page 39
• Operation lamp luminance ……
☞
page 40
Initial settings
Controller sound
Operation lamp luminance
Previous Back
Select the item.
Initial settings
Clock setting
Date & time display
Summer time
Contrast
Backlight
Next Back
Select the item.
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings
⇒
Clock setting .
2
The “Clock setting” screen is displayed.
Set the “dd/mm/yy” with the
▲ ▼ buttons.
Tap the
Time button after the setting.
■
The “clock setting” is necessary for the following settings.
· Peak-cut timer
· Set ON timer by clock, Set OFF timer by clock
· Weekly timer
· Outdoor unit silent mode timer
· Filter sign reset, Setting next cleaning date
■
Clock setting
You can set and correct the current date and time.
dd