Mitsubishi Heavy Industries RC-EX3D - Timer; Set on Timer by Hour; Set off Timer by Hour; Set on Timer by Clock

─
40
─
1
Tap the Menu button on the TOP screen and select User setting
⇒
Initial settings
⇒
Operation lamp luminance .
2
The Operation lamp luminance adjustment screen is displayed.
You can adjust the luminance of the operation lamp to a desired
level by tapping the
▲ Light / ▼ Dark button.
3
After you make the settings, tap the Set button.
■
Operation lamp luminance
You can adjust the operation lamp luminance.
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
Timer
2
Tap a desired item on the Timer menu.
• Set ON timer by hour ……
☞
page 42
• Set OFF timer by hour ……
☞
page 43
• Set ON timer by clock ……
☞
page 44
• Set OFF timer by clock ……
☞
page 44
• Weekly timer ……
☞
page 45
• Conrm ……
☞
page 48
When the timer is set, the
Conrm
button is displayed.
The button is not displayed unless the timer is set.
Timer
· The Clock setting (
☞
page 36) must be made when the Set ON timer by clock or Set OFF timer by clock is used.
Advice
Operation lamp luminance
Back
Use ▲▼ to adjust light and dark.
Set
▲
Light
▼
Dark