Mitsubishi Heavy Industries RC-EX3D - Note Wireless Interface Setting

─
73
─
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
Wireless interface setting .
■
If no IU equipped with wireless interface function is connected, a message "Invalid request." is displayed on the R/C screen.
2
When two or more IUs are connected to the R/C, a list of IUs is
displayed. Tap the IU to be set.
3
Tap a desired item.
1
Enable/Disable ... You can set Enable/Disable for wireless
interface setting. (
☞
page 74)
2
WPS/AP ... You can set the communication mode for
wireless interface. (
☞
page 74)
3
Reset ... You can resets the wireless interface setting.
(
☞
page 74)
Wireless interface setting
Set the various settings related to the wireless interface.
■
When the R/C is set as the sub R/C, the wireless interface setting cannot be set.
IU select
Next Back
Select an IU address.