Mitsubishi Heavy Industries RC-EX3D - 5. Maintenance of unit and LCD; Maintenance of unit and LCD

─
75
─
1
Tap the Menu button on the TOP screen and select Useful functions
⇒
Control mode & Eco level .
■
If no OU equipped with control mode & eco level function is connected, Control mode & Eco level will not be displayed.
2
When two or more IUs are connected to the R/C, a list of IUs is
displayed. Tap the IU to be set.
4
Select the control mode.
1
Saving mode ... Most energy saving mode.
Suitable for low cooling/heating demand in the
building.
2
VTCC+ mode ... Most balanced mode between capacity control
and energy saving.
Suitable for cooling/heating demand varies
among the room in the building.
3
Std mode ... Capacity is maximised.
Suitable for high cooling/heating demand in
the building.
3
Tap a desired item.
1
Cool, Dry ... You can set the control mode for Cooling or
Dry.
2
Heating ... You can set the control mode for Heating.
■
The rest of the procedure is the same for both items.
5
Select the eco level.
Eco level: U-High > High > Mid > Low
■
The eco level can be set only when ”Saving mode” or ”VTCC+ mode” is
selected in control mode.
Control mode & Eco level
Automatically controls the capacity depending on the R/C set temperature and the indoor temperature, which enables
the energy-saving operation without sacricing comfort.
■
When the R/C is set as the sub R/C, the control mode & eco level cannot be set.
IU select
Next Back
Select an IU address.