─
77
─
5. Maintenance of unit and LCD
Maintenance of unit and LCD
■
Wipe the surface of LCD and main body of the remote control with a dry cloth when cleaning is required.
■
If the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with water, squeeze the cloth tightly, and clean the
surface. Wipe the surface with a dry cloth then.
Note
Do not use any paint thinner, organic solvent, or strong acid.
Warning
Do not use flammable materials (e.g. hairspray or insecticide) near
the unit.
Do not clean the unit with benzene or paint thinner.
It could cause crack damage to the unit, electric shocks, or re.
To Next Page
Loading...
