To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Heavy Industries SRK09CJ-3 and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Cooling Capacity (BTU) | 8530 BTU/h |
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8.5 kg |
| Noise Level (Outdoor) | 50 dB(A) |
Details cooling capacity in W/BTU/h and power supply specifications (voltage, phase, frequency).
Summarizes power consumption, current, COP, and noise levels for cooling operation.
Lists compressor type, motor specs, refrigerant oil, and refrigerant quantity and type.
Defines the acceptable indoor/outdoor air temperatures and humidity for operation.
Specifies maximum refrigerant line length and vertical height difference between units.
Provides charts for correcting cooling capacity based on indoor/outdoor temperatures and piping length.
Highlights critical safety warnings and cautions for installation and operation.
Details recommended and prohibited locations for indoor and outdoor unit installation.
Explains the functions of various buttons on the remote controller for operation control.
Offers a step-by-step guide for diagnosing issues when the unit does not start.
Provides a procedure for diagnosing problems when the unit is running but malfunctioning.
Details error codes indicated by flashing lights and their corresponding causes.
Guides through the steps for installing the indoor unit, including board mounting and sleeve fitting.
Explains protective control functions for various operational scenarios.
Illustrates the electrical wiring for indoor units.
Displays the electrical wiring for outdoor units.
Details critical safety warnings, prohibitions, and earthing requirements.
Details troubleshooting steps for unit non-operation, running issues, and error diagnosis.
